11 Machine Settings

Where to find it on the HMI (typical)

1. Present RFID tag (Engineer level).

2. Navigate to Settings → Machine settings.

3. Select the relevant category.

i5 machine settings (model-specific)

Document what differs from other i-Series machines. If a value is build dependent, note the range and the as-built default.

Motion and timing

• Transfer arm positions and timing: TBD

• Infeed/outfeed speed limits: TBD

• Tray pitch limits: TBD

Sealing station

• Tool lift stroke limits: TBD

• Seal platen offsets: TBD

• Temperature limits and scaling: TBD

Film system

• Unwind torque defaults: TBD

• Film snap / tension thresholds: TBD

• Register mark sensor setup (if fitted): TBD

Options and integrations

• Gas flush configuration: TBD

• Vacuum cycle enable: TBD

• Printer integration (if fitted): TBD

Service and diagnostics

• Service interval timers: TBD

• Network / remote support parameters (if fitted): TBD