i3 Tray Sealer zones, access points, and component locations.
Supports safe operation, maintenance, and troubleshooting.
Use the machine GA drawing or OEM layout image for your build.
Typical i3 orientation:
Infeed to outfeed through the seal station.
Film feed/unwind at the film feed side.
Film rewind at the film rewind side.
HMI mounted at the operator access side.
Main electrical isolator on the electrical cabinet (location varies by build).
Infeed conveyor and tray guides.
Tray spacing and transfer arm area.
Seal station and tooling access.
Film path (feed, nip roller, sensor options, rewind).
Electrical cabinet and main isolator.
External equipment connection points (if fitted).
Typical location note:
External upstream/downstream sockets are commonly located behind a lower front door.
Wiring and pin use is build-specific. Use the electrical schematics.
Maintain clearance for door swing and guard removal.
Keep a clear tool staging area for safe lifts.
Keep access to the isolator unobstructed.
Last updated 7 hours ago