02 Safety

Safety Information

⚠️ Important

Only trained and authorised personnel should operate or maintain the i5 tray sealer.

Failure to follow correct safety procedures may result in injury or machine damage.


🔒 General Safety Rules

  • Do not operate the machine with guards removed

  • Isolate electrical supply before maintenance

  • Beware of hot sealing tooling

  • Keep clear of moving conveyors and transfer arms

  • Follow site lock-out/tag-out procedures


🛡️ Machine Safety Systems

The i5 is equipped with a Category 3 safety system to protect operators and maintenance personnel. :contentReference[oaicite:9]{index=9}

Safety features include:

  • Guard monitoring

  • Tray crush avoidance system

  • Phase monitoring protection

  • Film snap detection


🔧 Before Operating

Ensure:

  • Machine is free from foreign objects

  • Correct tooling is installed

  • Tray guides are correctly set

  • Air and electrical supplies are within specification


🚨 Emergency Stop

Emergency stop buttons are located on the operator panel.

When pressed:

  • Machine motion stops immediately

  • Drives are disabled

  • System requires reset before restart


📞 If in Doubt

Contact MPE technical support before continuing operation.

Last updated